Ich habe eine Spalte, die HTML enthält (wie unten gezeigt). Gibt es eine Möglichkeit, seinen Inhalt in einem Formular so anzuzeigen, dass es lesbar ist und nicht die gesamte Codierung anzeigt? < /P>
incident_description
"
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.[/b] [b]Dear All,
Please note that computer was not delivered by FedEx today. It seem there is a delay. Hopefully it arrives Monday.
Mabel
On Dec 31, 2020, at 6:07 PM, Global Service Desk <servicedesk@synteract.com> wrote:
Welcome Mabel,
We are very excited you have joined the Synteract family. You will find your Synteract login information below.
Your notebook has been shipped out and will arrive soon. To track your shipment, please use the following web page
https://www.fedex.com/apps/fedextrack/?action=track and the following tracking code:
946303508730[/b]
[b]
Once you receive your laptop, please log on using the credentials provided below and connect to your home WiFi or LAN, wait three minutes and restart the computer. After the restart, your computer should be connected properly.
[/b]
[b]
If you need technical assistance do not hesitate to contact the Service Desk by phone:
http://www.synteracthcr.com/Contact/Tech-Support or by email
ServiceDesk@synteract.com.
All other questions should be directed to your manager.
<image003.jpg>
Account for Synteract systems
Windows Username: [/b]
[b]
mjoachimo[/b]
[b]
Windows Password: [/b]
[b]
Temp2021[/b][b][/b]
[b]
E-Mail Address: [/b]
[b]
[u]Mabel.Joachimo@synteract.com[/u]
Telephone: Extension, Voicemail
Company Phone Number (Fuze):
760-795-2156[/b]
[b]
[/b]
[b]
[/b]
[b]
Global Service Desk[/b][b]| synteract[/b]®
[b]
Support: 760.268.8242 | Toll-free: 866.682.9827
For a list of international Support numbers:
https://www.synteract.com/Contact/Tech-Support
Email:
servicedesk@synteract.com
www.Synteract.com[/b][b][/b]
<Employee IT Handbook_New Citrix.pdf>
IMPORTANT - PLEASE READ: This electronic message, including its attachments, is CONFIDENTIAL and may contain PROPRIETARY or LEGALLY PRIVILEGED or PROTECTED information and is intended for the authorized recipient of the sender. If you are not the intended recipient, you are hereby notified that any use, disclosure, copying, or distribution of this message or any of the information included in it is unauthorized and strictly prohibited. If you have received this message in error, please immediately notify the sender by reply e-mail and permanently delete this message and its attachments, along with any copies thereof, from all locations received (e.g., computer, mobile device, etc.).
"
Ich habe eine Spalte, die HTML enthält (wie unten gezeigt). Gibt es eine Möglichkeit, seinen Inhalt in einem Formular so anzuzeigen, dass es lesbar ist und nicht die gesamte Codierung anzeigt? < /P> [b] [code]incident_description "
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.[/b] [b]Dear All, Please note that computer was not delivered by FedEx today. It seem there is a delay. Hopefully it arrives Monday.
Mabel On Dec 31, 2020, at 6:07 PM, Global Service Desk <servicedesk@synteract.com> wrote:
Welcome Mabel, We are very excited you have joined the Synteract family. You will find your Synteract login information below. Your notebook has been shipped out and will arrive soon. To track your shipment, please use the following web page https://www.fedex.com/apps/fedextrack/?action=track and the following tracking code: 946303508730[/b] [b] Once you receive your laptop, please log on using the credentials provided below and connect to your home WiFi or LAN, wait three minutes and restart the computer. After the restart, your computer should be connected properly. [/b] [b] If you need technical assistance do not hesitate to contact the Service Desk by phone: http://www.synteracthcr.com/Contact/Tech-Support or by email ServiceDesk@synteract.com. All other questions should be directed to your manager.
<image003.jpg>
Account for Synteract systems
Windows Username: [/b] [b] mjoachimo[/b] [b]
Windows Password: [/b] [b] Temp2021[/b][b][/b] [b]
[/b] [b] [/b] [b] Global Service Desk[/b][b]| synteract[/b]® [b] Support: 760.268.8242 | Toll-free: 866.682.9827 For a list of international Support numbers: https://www.synteract.com/Contact/Tech-Support
IMPORTANT - PLEASE READ: This electronic message, including its attachments, is CONFIDENTIAL and may contain PROPRIETARY or LEGALLY PRIVILEGED or PROTECTED information and is intended for the authorized recipient of the sender. If you are not the intended recipient, you are hereby notified that any use, disclosure, copying, or distribution of this message or any of the information included in it is unauthorized and strictly prohibited. If you have received this message in error, please immediately notify the sender by reply e-mail and permanently delete this message and its attachments, along with any copies thereof, from all locations received (e.g., computer, mobile device, etc.).
Mein Team erstellt eine iOS -App. Die App enthält mehrere HTML -Dateien. Der Benutzer sollte in der Lage sein, nach unten zu scrollen, und die nächste Datei sollte gleich nach dem vorherigen...
Ich verwende die JeditorPane -Komponente, um persische und englische HTML -Dateien anzuzeigen. Ich habe die HTML -Dateien aus Word -Dateien erstellt. Wenn ich die HTML -Dateien alleine öffne, werden...
Wie kann ich es schaffen, HTML in einem Schnurrbartbindung zu interpretieren? Im Moment der Pause (
) wird gerade angezeigt /entkommen.var logapp = new Vue({
el: '#logapp',
data: {
title: 'Logs',...
Ich möchte eine E-Mail in HTML senden. In der HTML möchte ich auch ein weiteres HTML -Objekt einbetten, das in einem lokalen Ordner abgerufen wurde. email_content = jinja_template.render(msg)...
Ich möchte eine E-Mail in HTML senden. In der HTML möchte ich auch ein weiteres HTML -Objekt einbetten, das in einem lokalen Ordner abgerufen wurde. email_content = jinja_template.render(msg)...