PS C:\Users\david> python3 -m pip install numpy
Collecting numpy
Downloading numpy-2.2.1.tar.gz (20.2 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 20.2/20.2 MB 42.6 MB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... done
Installing backend dependencies ... error
error: subprocess-exited-with-error
× pip subprocess to install backend dependencies did not run successfully.
│ exit code: 1
╰─> [133 lines of output]
Collecting ninja>=1.8.2
Downloading ninja-1.11.1.3.tar.gz (129 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Installing backend dependencies: started
Installing backend dependencies: finished with status 'error'
error: subprocess-exited-with-error
pip subprocess to install backend dependencies did not run successfully.
exit code: 1
[108 lines of output]
Collecting setuptools-scm
Downloading setuptools_scm-8.1.0-py3-none-any.whl.metadata (6.6 kB)
Collecting cmake>=3.15
Downloading cmake-3.31.2.tar.gz (34 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting hatch-fancy-pypi-readme>=22.3
Downloading hatch_fancy_pypi_readme-24.1.0-py3-none-any.whl.metadata (2.0 kB)
Collecting packaging>=20 (from setuptools-scm)
Using cached packaging-24.2-py3-none-any.whl.metadata (3.2 kB)
Collecting setuptools (from setuptools-scm)
Downloading setuptools-75.7.0-py3-none-any.whl.metadata (6.7 kB)
Collecting hatchling (from hatch-fancy-pypi-readme>=22.3)
Downloading hatchling-1.27.0-py3-none-any.whl.metadata (3.8 kB)
Collecting pathspec>=0.10.1 (from hatchling->hatch-fancy-pypi-readme>=22.3)
Using cached pathspec-0.12.1-py3-none-any.whl.metadata (21 kB)
Collecting pluggy>=1.0.0 (from hatchling->hatch-fancy-pypi-readme>=22.3)
Downloading pluggy-1.5.0-py3-none-any.whl.metadata (4.8 kB)
Collecting trove-classifiers (from hatchling->hatch-fancy-pypi-readme>=22.3)
Downloading trove_classifiers-2025.1.6.15-py3-none-any.whl.metadata (2.2 kB)
Downloading setuptools_scm-8.1.0-py3-none-any.whl (43 kB)
Downloading hatch_fancy_pypi_readme-24.1.0-py3-none-any.whl (10 kB)
Using cached packaging-24.2-py3-none-any.whl (65 kB)
Downloading hatchling-1.27.0-py3-none-any.whl (75 kB)
Downloading setuptools-75.7.0-py3-none-any.whl (1.2 MB)
---------------------------------------- 1.2/1.2 MB 15.3 MB/s eta 0:00:00
Using cached pathspec-0.12.1-py3-none-any.whl (31 kB)
Downloading pluggy-1.5.0-py3-none-any.whl (20 kB)
Downloading trove_classifiers-2025.1.6.15-py3-none-any.whl (13 kB)
Building wheels for collected packages: cmake
Building wheel for cmake (pyproject.toml): started
Building wheel for cmake (pyproject.toml): finished with status 'error'
error: subprocess-exited-with-error
Building wheel for cmake (pyproject.toml) did not run successfully.
exit code: 1
[60 lines of output]
Traceback (most recent call last):
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1348, in do_open
h.request(req.get_method(), req.selector, req.data, headers,
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1294, in request
self._send_request(method, url, body, headers, encode_chunked)
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1340, in _send_request
self.endheaders(body, encode_chunked=encode_chunked)
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1289, in endheaders
self._send_output(message_body, encode_chunked=encode_chunked)
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1048, in _send_output
self.send(msg)
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 986, in send
self.connect()
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1466, in connect
self.sock = self._context.wrap_socket(self.sock,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 517, in wrap_socket
return self.sslsocket_class._create(
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 1108, in _create
self.do_handshake()
File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 1383, in do_handshake
self._sslobj.do_handshake()
ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1006)
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 353, in
main()
File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 335, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 251, in build_wheel
return _build_backend().build_wheel(wheel_directory, config_settings,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\david\AppData\Local\Temp\pip-install-asx64kyy\cmake_7260e98108244fe5aff2fac585dc6406\_build_backend\backend.py", line 156, in build_wheel
cmake_path = _bootstrap_build(temp_path, config_settings)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\david\AppData\Local\Temp\pip-install-asx64kyy\cmake_7260e98108244fe5aff2fac585dc6406\_build_backend\backend.py", line 103, in _bootstrap_build
with urllib.request.urlopen(archive_url) as response:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 216, in urlopen
return opener.open(url, data, timeout)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 519, in open
response = self._open(req, data)
^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 536, in _open
result = self._call_chain(self.handle_open, protocol, protocol +
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 496, in _call_chain
result = func(*args)
^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1391, in https_open
return self.do_open(http.client.HTTPSConnection, req,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1351, in do_open
raise URLError(err)
urllib.error.URLError:
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for cmake
Failed to build cmake
ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (cmake)
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
pip subprocess to install backend dependencies did not run successfully.
exit code: 1
See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× pip subprocess to install backend dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Ich habe versucht, die Pip-Setup-Tools neu zu installieren, den Pip-Cache zu leeren und sogar Python zu deinstallieren und neu zu installieren. Ich verwende Python 3.11.7.
Dies geschieht unabhängig davon, ob ich in der globalen Python-Umgebung oder auf einem Venv installiere oder nicht. Irgendwelche Ratschläge?
Ich habe Windows neu gestartet und bei der Neuinstallation meiner Python-Pakete tritt immer wieder dieser Fehler auf [code]PS C:\Users\david> python3 -m pip install numpy Collecting numpy Downloading numpy-2.2.1.tar.gz (20.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 20.2/20.2 MB 42.6 MB/s eta 0:00:00 Installing build dependencies ... done Getting requirements to build wheel ... done Installing backend dependencies ... error error: subprocess-exited-with-error
× pip subprocess to install backend dependencies did not run successfully. │ exit code: 1 ╰─> [133 lines of output] Collecting ninja>=1.8.2 Downloading ninja-1.11.1.3.tar.gz (129 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Installing backend dependencies: started Installing backend dependencies: finished with status 'error' error: subprocess-exited-with-error
pip subprocess to install backend dependencies did not run successfully. exit code: 1
[108 lines of output] Collecting setuptools-scm Downloading setuptools_scm-8.1.0-py3-none-any.whl.metadata (6.6 kB) Collecting cmake>=3.15 Downloading cmake-3.31.2.tar.gz (34 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting hatch-fancy-pypi-readme>=22.3 Downloading hatch_fancy_pypi_readme-24.1.0-py3-none-any.whl.metadata (2.0 kB) Collecting packaging>=20 (from setuptools-scm) Using cached packaging-24.2-py3-none-any.whl.metadata (3.2 kB) Collecting setuptools (from setuptools-scm) Downloading setuptools-75.7.0-py3-none-any.whl.metadata (6.7 kB) Collecting hatchling (from hatch-fancy-pypi-readme>=22.3) Downloading hatchling-1.27.0-py3-none-any.whl.metadata (3.8 kB) Collecting pathspec>=0.10.1 (from hatchling->hatch-fancy-pypi-readme>=22.3) Using cached pathspec-0.12.1-py3-none-any.whl.metadata (21 kB) Collecting pluggy>=1.0.0 (from hatchling->hatch-fancy-pypi-readme>=22.3) Downloading pluggy-1.5.0-py3-none-any.whl.metadata (4.8 kB) Collecting trove-classifiers (from hatchling->hatch-fancy-pypi-readme>=22.3) Downloading trove_classifiers-2025.1.6.15-py3-none-any.whl.metadata (2.2 kB) Downloading setuptools_scm-8.1.0-py3-none-any.whl (43 kB) Downloading hatch_fancy_pypi_readme-24.1.0-py3-none-any.whl (10 kB) Using cached packaging-24.2-py3-none-any.whl (65 kB) Downloading hatchling-1.27.0-py3-none-any.whl (75 kB) Downloading setuptools-75.7.0-py3-none-any.whl (1.2 MB) ---------------------------------------- 1.2/1.2 MB 15.3 MB/s eta 0:00:00 Using cached pathspec-0.12.1-py3-none-any.whl (31 kB) Downloading pluggy-1.5.0-py3-none-any.whl (20 kB) Downloading trove_classifiers-2025.1.6.15-py3-none-any.whl (13 kB) Building wheels for collected packages: cmake Building wheel for cmake (pyproject.toml): started Building wheel for cmake (pyproject.toml): finished with status 'error' error: subprocess-exited-with-error
Building wheel for cmake (pyproject.toml) did not run successfully. exit code: 1
[60 lines of output] Traceback (most recent call last): File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1348, in do_open h.request(req.get_method(), req.selector, req.data, headers, File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1294, in request self._send_request(method, url, body, headers, encode_chunked) File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1340, in _send_request self.endheaders(body, encode_chunked=encode_chunked) File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1289, in endheaders self._send_output(message_body, encode_chunked=encode_chunked) File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1048, in _send_output self.send(msg) File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 986, in send self.connect() File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1466, in connect self.sock = self._context.wrap_socket(self.sock, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 517, in wrap_socket return self.sslsocket_class._create( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 1108, in _create self.do_handshake() File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 1383, in do_handshake self._sslobj.do_handshake() ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1006)
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 353, in main() File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 335, in main json_out['return_val'] = hook(**hook_input['kwargs']) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 251, in build_wheel return _build_backend().build_wheel(wheel_directory, config_settings, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\david\AppData\Local\Temp\pip-install-asx64kyy\cmake_7260e98108244fe5aff2fac585dc6406\_build_backend\backend.py", line 156, in build_wheel cmake_path = _bootstrap_build(temp_path, config_settings) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\david\AppData\Local\Temp\pip-install-asx64kyy\cmake_7260e98108244fe5aff2fac585dc6406\_build_backend\backend.py", line 103, in _bootstrap_build with urllib.request.urlopen(archive_url) as response: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 216, in urlopen return opener.open(url, data, timeout) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 519, in open response = self._open(req, data) ^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 536, in _open result = self._call_chain(self.handle_open, protocol, protocol + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 496, in _call_chain result = func(*args) ^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1391, in https_open return self.do_open(http.client.HTTPSConnection, req, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1351, in do_open raise URLError(err) urllib.error.URLError: [end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cmake Failed to build cmake ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (cmake) [end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error
pip subprocess to install backend dependencies did not run successfully. exit code: 1
See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip. [end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error
× pip subprocess to install backend dependencies did not run successfully. │ exit code: 1 ╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip. [/code] Ich habe versucht, die Pip-Setup-Tools neu zu installieren, den Pip-Cache zu leeren und sogar Python zu deinstallieren und neu zu installieren. Ich verwende Python 3.11.7. Dies geschieht unabhängig davon, ob ich in der globalen Python-Umgebung oder auf einem Venv installiere oder nicht. Irgendwelche Ratschläge?
Ich versuche, ein neues React Native-Projekt auf meinem Mac (macOS 12.7.6, Xcode 14.2) mit dem folgenden Befehl zu erstellen:
npx @react-native-community/cli init Projektname
Allerdings Während des...
Ich habe versucht, Docker für ein paar Projekte zu verwenden, eines ist ein Django und ein anderes ist ein Python-Telegram-Bot; Aber in beiden Fällen besteht das Problem darin, dass egal wie ich...
Problembeschreibung
Ich versuche, AlphaPulldown (APD) auf Google Colab zu installieren und zu verwenden. Laut Installationshandbuch ist eine Conda-basierte virtuelle Umgebung erforderlich, um einen...
Ich möchte von Dotnet Maui und in Kotlin implementiertem Android -Aktivität starten, das Jetpack -Komponierungselemente verwendet. open class ExampleActivity : ComponentActivity() {
Ich habe ein seltsames Problem in IntelliJ IDEA, bei dem Abhängigkeiten nicht erkannt werden, wenn eine vorhandene (funktionierende) Maven-Anwendung verwendet wird. Die Abhängigkeiten werden beim...
Mobile version