PS C:\Users\david> python3 -m pip install numpy
Collecting numpy
Downloading numpy-2.2.1.tar.gz (20.2 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 20.2/20.2 MB 42.6 MB/s eta 0:00:00
Installing build dependencies ... done
Getting requirements to build wheel ... done
Installing backend dependencies ... error
error: subprocess-exited-with-error
× pip subprocess to install backend dependencies did not run successfully.
│ exit code: 1
╰─> [133 lines of output]
Collecting ninja>=1.8.2
Downloading ninja-1.11.1.3.tar.gz (129 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Installing backend dependencies: started
Installing backend dependencies: finished with status 'error'
error: subprocess-exited-with-error
pip subprocess to install backend dependencies did not run successfully.
exit code: 1
[108 lines of output]
Collecting setuptools-scm
Downloading setuptools_scm-8.1.0-py3-none-any.whl.metadata (6.6 kB)
Collecting cmake>=3.15
Downloading cmake-3.31.2.tar.gz (34 kB)
Installing build dependencies: started
Installing build dependencies: finished with status 'done'
Getting requirements to build wheel: started
Getting requirements to build wheel: finished with status 'done'
Preparing metadata (pyproject.toml): started
Preparing metadata (pyproject.toml): finished with status 'done'
Collecting hatch-fancy-pypi-readme>=22.3
Downloading hatch_fancy_pypi_readme-24.1.0-py3-none-any.whl.metadata (2.0 kB)
Collecting packaging>=20 (from setuptools-scm)
Using cached packaging-24.2-py3-none-any.whl.metadata (3.2 kB)
Collecting setuptools (from setuptools-scm)
Downloading setuptools-75.7.0-py3-none-any.whl.metadata (6.7 kB)
Collecting hatchling (from hatch-fancy-pypi-readme>=22.3)
Downloading hatchling-1.27.0-py3-none-any.whl.metadata (3.8 kB)
Collecting pathspec>=0.10.1 (from hatchling->hatch-fancy-pypi-readme>=22.3)
Using cached pathspec-0.12.1-py3-none-any.whl.metadata (21 kB)
Collecting pluggy>=1.0.0 (from hatchling->hatch-fancy-pypi-readme>=22.3)
Downloading pluggy-1.5.0-py3-none-any.whl.metadata (4.8 kB)
Collecting trove-classifiers (from hatchling->hatch-fancy-pypi-readme>=22.3)
Downloading trove_classifiers-2025.1.6.15-py3-none-any.whl.metadata (2.2 kB)
Downloading setuptools_scm-8.1.0-py3-none-any.whl (43 kB)
Downloading hatch_fancy_pypi_readme-24.1.0-py3-none-any.whl (10 kB)
Using cached packaging-24.2-py3-none-any.whl (65 kB)
Downloading hatchling-1.27.0-py3-none-any.whl (75 kB)
Downloading setuptools-75.7.0-py3-none-any.whl (1.2 MB)
---------------------------------------- 1.2/1.2 MB 15.3 MB/s eta 0:00:00
Using cached pathspec-0.12.1-py3-none-any.whl (31 kB)
Downloading pluggy-1.5.0-py3-none-any.whl (20 kB)
Downloading trove_classifiers-2025.1.6.15-py3-none-any.whl (13 kB)
Building wheels for collected packages: cmake
Building wheel for cmake (pyproject.toml): started
Building wheel for cmake (pyproject.toml): finished with status 'error'
error: subprocess-exited-with-error
Building wheel for cmake (pyproject.toml) did not run successfully.
exit code: 1
[60 lines of output]
Traceback (most recent call last):
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1348, in do_open
h.request(req.get_method(), req.selector, req.data, headers,
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1294, in request
self._send_request(method, url, body, headers, encode_chunked)
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1340, in _send_request
self.endheaders(body, encode_chunked=encode_chunked)
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1289, in endheaders
self._send_output(message_body, encode_chunked=encode_chunked)
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1048, in _send_output
self.send(msg)
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 986, in send
self.connect()
File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1466, in connect
self.sock = self._context.wrap_socket(self.sock,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 517, in wrap_socket
return self.sslsocket_class._create(
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 1108, in _create
self.do_handshake()
File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 1383, in do_handshake
self._sslobj.do_handshake()
ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1006)
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 353, in
main()
File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 335, in main
json_out['return_val'] = hook(**hook_input['kwargs'])
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 251, in build_wheel
return _build_backend().build_wheel(wheel_directory, config_settings,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\david\AppData\Local\Temp\pip-install-asx64kyy\cmake_7260e98108244fe5aff2fac585dc6406\_build_backend\backend.py", line 156, in build_wheel
cmake_path = _bootstrap_build(temp_path, config_settings)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\Users\david\AppData\Local\Temp\pip-install-asx64kyy\cmake_7260e98108244fe5aff2fac585dc6406\_build_backend\backend.py", line 103, in _bootstrap_build
with urllib.request.urlopen(archive_url) as response:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 216, in urlopen
return opener.open(url, data, timeout)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 519, in open
response = self._open(req, data)
^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 536, in _open
result = self._call_chain(self.handle_open, protocol, protocol +
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 496, in _call_chain
result = func(*args)
^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1391, in https_open
return self.do_open(http.client.HTTPSConnection, req,
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1351, in do_open
raise URLError(err)
urllib.error.URLError:
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for cmake
Failed to build cmake
ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (cmake)
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
pip subprocess to install backend dependencies did not run successfully.
exit code: 1
See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
× pip subprocess to install backend dependencies did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
Ich habe versucht, die Pip-Setup-Tools neu zu installieren, den Pip-Cache zu leeren und sogar Python zu deinstallieren und neu zu installieren. Ich verwende Python 3.11.7.
Dies geschieht unabhängig davon, ob ich in der globalen Python-Umgebung oder auf einem Venv installiere oder nicht. Irgendwelche Ratschläge?
Ich habe Windows neu gestartet und bei der Neuinstallation meiner Python-Pakete tritt immer wieder dieser Fehler auf [code]PS C:\Users\david> python3 -m pip install numpy Collecting numpy Downloading numpy-2.2.1.tar.gz (20.2 MB) ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 20.2/20.2 MB 42.6 MB/s eta 0:00:00 Installing build dependencies ... done Getting requirements to build wheel ... done Installing backend dependencies ... error error: subprocess-exited-with-error
× pip subprocess to install backend dependencies did not run successfully. │ exit code: 1 ╰─> [133 lines of output] Collecting ninja>=1.8.2 Downloading ninja-1.11.1.3.tar.gz (129 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Installing backend dependencies: started Installing backend dependencies: finished with status 'error' error: subprocess-exited-with-error
pip subprocess to install backend dependencies did not run successfully. exit code: 1
[108 lines of output] Collecting setuptools-scm Downloading setuptools_scm-8.1.0-py3-none-any.whl.metadata (6.6 kB) Collecting cmake>=3.15 Downloading cmake-3.31.2.tar.gz (34 kB) Installing build dependencies: started Installing build dependencies: finished with status 'done' Getting requirements to build wheel: started Getting requirements to build wheel: finished with status 'done' Preparing metadata (pyproject.toml): started Preparing metadata (pyproject.toml): finished with status 'done' Collecting hatch-fancy-pypi-readme>=22.3 Downloading hatch_fancy_pypi_readme-24.1.0-py3-none-any.whl.metadata (2.0 kB) Collecting packaging>=20 (from setuptools-scm) Using cached packaging-24.2-py3-none-any.whl.metadata (3.2 kB) Collecting setuptools (from setuptools-scm) Downloading setuptools-75.7.0-py3-none-any.whl.metadata (6.7 kB) Collecting hatchling (from hatch-fancy-pypi-readme>=22.3) Downloading hatchling-1.27.0-py3-none-any.whl.metadata (3.8 kB) Collecting pathspec>=0.10.1 (from hatchling->hatch-fancy-pypi-readme>=22.3) Using cached pathspec-0.12.1-py3-none-any.whl.metadata (21 kB) Collecting pluggy>=1.0.0 (from hatchling->hatch-fancy-pypi-readme>=22.3) Downloading pluggy-1.5.0-py3-none-any.whl.metadata (4.8 kB) Collecting trove-classifiers (from hatchling->hatch-fancy-pypi-readme>=22.3) Downloading trove_classifiers-2025.1.6.15-py3-none-any.whl.metadata (2.2 kB) Downloading setuptools_scm-8.1.0-py3-none-any.whl (43 kB) Downloading hatch_fancy_pypi_readme-24.1.0-py3-none-any.whl (10 kB) Using cached packaging-24.2-py3-none-any.whl (65 kB) Downloading hatchling-1.27.0-py3-none-any.whl (75 kB) Downloading setuptools-75.7.0-py3-none-any.whl (1.2 MB) ---------------------------------------- 1.2/1.2 MB 15.3 MB/s eta 0:00:00 Using cached pathspec-0.12.1-py3-none-any.whl (31 kB) Downloading pluggy-1.5.0-py3-none-any.whl (20 kB) Downloading trove_classifiers-2025.1.6.15-py3-none-any.whl (13 kB) Building wheels for collected packages: cmake Building wheel for cmake (pyproject.toml): started Building wheel for cmake (pyproject.toml): finished with status 'error' error: subprocess-exited-with-error
Building wheel for cmake (pyproject.toml) did not run successfully. exit code: 1
[60 lines of output] Traceback (most recent call last): File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1348, in do_open h.request(req.get_method(), req.selector, req.data, headers, File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1294, in request self._send_request(method, url, body, headers, encode_chunked) File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1340, in _send_request self.endheaders(body, encode_chunked=encode_chunked) File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1289, in endheaders self._send_output(message_body, encode_chunked=encode_chunked) File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1048, in _send_output self.send(msg) File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 986, in send self.connect() File "C:\msys64\ucrt64\lib\python3.11\http\client.py", line 1466, in connect self.sock = self._context.wrap_socket(self.sock, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 517, in wrap_socket return self.sslsocket_class._create( ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 1108, in _create self.do_handshake() File "C:\msys64\ucrt64\lib\python3.11\ssl.py", line 1383, in do_handshake self._sslobj.do_handshake() ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1006)
During handling of the above exception, another exception occurred:
Traceback (most recent call last): File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 353, in main() File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 335, in main json_out['return_val'] = hook(**hook_input['kwargs']) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\site-packages\pip\_vendor\pyproject_hooks\_in_process\_in_process.py", line 251, in build_wheel return _build_backend().build_wheel(wheel_directory, config_settings, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\david\AppData\Local\Temp\pip-install-asx64kyy\cmake_7260e98108244fe5aff2fac585dc6406\_build_backend\backend.py", line 156, in build_wheel cmake_path = _bootstrap_build(temp_path, config_settings) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\Users\david\AppData\Local\Temp\pip-install-asx64kyy\cmake_7260e98108244fe5aff2fac585dc6406\_build_backend\backend.py", line 103, in _bootstrap_build with urllib.request.urlopen(archive_url) as response: ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 216, in urlopen return opener.open(url, data, timeout) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 519, in open response = self._open(req, data) ^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 536, in _open result = self._call_chain(self.handle_open, protocol, protocol + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 496, in _call_chain result = func(*args) ^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1391, in https_open return self.do_open(http.client.HTTPSConnection, req, ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ File "C:\msys64\ucrt64\lib\python3.11\urllib\request.py", line 1351, in do_open raise URLError(err) urllib.error.URLError: [end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. ERROR: Failed building wheel for cmake Failed to build cmake ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (cmake) [end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error
pip subprocess to install backend dependencies did not run successfully. exit code: 1
See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip. [end of output]
note: This error originates from a subprocess, and is likely not a problem with pip. error: subprocess-exited-with-error
× pip subprocess to install backend dependencies did not run successfully. │ exit code: 1 ╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip. [/code] Ich habe versucht, die Pip-Setup-Tools neu zu installieren, den Pip-Cache zu leeren und sogar Python zu deinstallieren und neu zu installieren. Ich verwende Python 3.11.7. Dies geschieht unabhängig davon, ob ich in der globalen Python-Umgebung oder auf einem Venv installiere oder nicht. Irgendwelche Ratschläge?
Ich versuche, ein neues React Native-Projekt auf meinem Mac (macOS 12.7.6, Xcode 14.2) mit dem folgenden Befehl zu erstellen:
npx @react-native-community/cli init Projektname
Allerdings Während des...
Ich habe versucht, Docker für ein paar Projekte zu verwenden, eines ist ein Django und ein anderes ist ein Python-Telegram-Bot; Aber in beiden Fällen besteht das Problem darin, dass egal wie ich...
Ich habe ein seltsames Problem in IntelliJ IDEA, bei dem Abhängigkeiten nicht erkannt werden, wenn eine vorhandene (funktionierende) Maven-Anwendung verwendet wird. Die Abhängigkeiten werden beim...
Ich möchte von Dotnet Maui und in Kotlin implementiertem Android -Aktivität starten, das Jetpack -Komponierungselemente verwendet. open class ExampleActivity : ComponentActivity() {
Problembeschreibung
Ich versuche, AlphaPulldown (APD) auf Google Colab zu installieren und zu verwenden. Laut Installationshandbuch ist eine Conda-basierte virtuelle Umgebung erforderlich, um einen...
Mobile version